Tuesday, August 14, 2012

Yardstick Frame

I'm back! I have had surgery on both hands this summer and now it's all done! I will be getting the stitches out of my left hand in a week and then I just have to build my strength back up in them. But I'm just glad it's over!

I hope all of you have been enjoying your summer. There were so many things I wanted to do on this blog this summer, but not being able to use my hands was a definite drawback. It will still be a little slow until the hands are fully healed, but at least I can type now. And take pictures. And do easy projects if I'm careful.

So the first one is a yardstick frame. It's simple and easy and you can make them for gifts or for yourselves. Start with two yardsticks. I was making mine for a 5x7" photo, so I cut my yardstick in these lengths: 4 pieces 8" long and 4 pieces 6" long.

I got my yardsticks at Lowe's and they were wider than the ones I use for measuring, that I've had for years, so you have to go by the width of your yardsticks to get the right measurements. Say you are framing a 5x7" photo. You subtract 1/2" of each measurement, giving you 41/2" and 6 1/2". Then add the width of the yardstick and cut your pieces that long. You will need 4 pieces of each measurement.

Now you will need a square, which is a tool for making sure your corners are square. You can use a protractor if you have one, or you can use an uncut piece of paper or cardstock, which should be perfectly square. Lay down your first long piece along one edge of the paper and then lay a short one along an adjacent side. Make sure they are perfectly aligned and square, then lay another long piece and short piece. Notice they make a pattern when laid right. 

Now you are ready to place the next layer. I will use the above picture as a reference. The piece at the bottom of the frame goes all the way to the corner of the square, while the piece on the left does not. It butts up next to the first piece. In your second layer, the piece on the left will go all the way down to the corner and the piece on the bottom will butt up to it.


This makes your frame strong, by overlapping all the joints on the two layers. Glue them together carefully, making sure they stay squared up. I put wax paper under them to keep any stray glue off the table. Use Elmer's Glue or wood glue, but DO NOT use school glue or hot glue. They won't hold!(This is the voice of experience talking.)


Lay a big heavy book on it to hold it in place until it dries. After the frame is glued and dried overnight, cut a piece of mat board or poster board to the back. Glue only three sides so you have a space to slide your picture into the frame.

I drilled a hole in each upper corner and tied on some jute to hang it, and added a jute bow and some buttons for decoration.


It still doesn't feel finished, but I'll leave it alone for now. When I come back to it, maybe I'll change some things. I do that sometimes. Walk away and let it rest, and then when I see it again, I know just what it needs.

Well, that's it for today. I don't know when I'll post again. I'm not keeping a schedule right now, but it will be soon. When school starts again, I'll get back to a schedule. For now, hold your head up high and don't be afraid to try new things. You can always re-do them if you need to. Love to all,

4 comments:

  1. Hi! I wasn't sure which blog to post to, but I like your yardstick frame. It's awesome that you share the instructions. Maybe I'll eventually get to making one myself!

    I'm Sweettems on Swap-Bot and came by for the Follow Me #7 Swap. My blog: loopsandlace.sweetseamstress.com

    ReplyDelete
  2. I love the yardstick frame tutorial. Thanks!

    ReplyDelete
  3. Love your yardstick tutorial. What a cute and crafty idea.

    ~j3ss1ca (Swap-Bot)

    ReplyDelete
  4. This comment has been removed by the author.

    ReplyDelete

We love comments! Crackers and I really want know what you think.